We used the tile adhesive with rope molding, and held it in place with spacers and blue masking tape.
Here are a couple of photos once that tape was removed.
8 years ago
My New Blog: TF Workshop
-
Attic Upgrade Part 4 – Insulation Done - I finished off the prep work in the attic and blew in all the insulation on Saturday. We ran the blower for about 4 hours, and we put about 1700 pounds of ...
Monday, June 25, 2007
Travertine Backsplash #4
We installed the tile along the stove wall, as well as the rope molding that will frame the focal point of harlequin tiles. This post is mainly pictures...
We used the tile adhesive with rope molding, and held it in place with spacers and blue masking tape.
Here are a couple of photos once that tape was removed.
We used the tile adhesive with rope molding, and held it in place with spacers and blue masking tape.Here are a couple of photos once that tape was removed.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment