My New Blog: TF Workshop

Sunday, May 27, 2007

Installing a Dish Rack

My DW finished painting the parts for the dish rack that's in the center of in the hutch, and I installed them. Here is a picture with the first plate inserted.


In most designs I looked at, the dowels were fixed, which would make cleaning difficult. I did find one at HD where they were removable, so I went with that.



It consists of upper and lower rails that hold the dowels. The top rails are about 1/4 inch thicker than the bottom ones, which allows you to slide the dowels in the top, then the bottom, and have them stay in place.

No comments: